ZX100 Series IP PBX
V1.2 Editor:Yu 7
th
,Jan,2011
49
Add Dial Rule
In Dial Rules -> add a new calling rule as below
Dial Rules
Now we have added a new calling rule “Out_VoIP” in the “DialPlan1”.
As we can see from the “Out_VoIP” dialing rule, all numbers start with 0 will be cut the first
one digits (‘0’) and sent to my sip service provider.
The Out_PSTN is in the same DialPlan1. Since we have added this dial plan to the
extensions in above, we don’t need to add dial plan again.
So when we have added two calling rules, any call start with 9 will be route to PSTN, and
call starts with 0 will be route to VoIP.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299