ZX100 Series IP PBX
V1.2 Editor:Yu 7
th
,Jan,2011
56
In the page Trunks--> Add a Trunk
Step 3: Set Dial Rule in ZX100-B, all calls start with 6 will be sent to ZX100-A.
In the page: Outbound Routers --> Add a Dial Rule
Step 4: Set the user 601 and Dial Plan in ZX100-A.
In the page: Extensions
Æ
Dial Plan
Active the change and apply the test:
1. Register an IP phone ZP302B to ZX100-B with 801 extension.
2. Register an IP phone ZP302A to ZX100-A with 601 extension.
3. Use 801 to dial 601. And you can see 601 will ring and you can pick up the calls.
Above is the way to router ZX100-B’s call to ZX100-A,
Accordingly, if you want to call from ZX100-A to ZX100-B, continue as follow:
Step 5:
Set Dial Rule in ZX100-A all calls start with 8 will be sent to ZX100-B.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
