Zycoo CooVox U100 Series, Quick Installation Manual

04

2  Hardware Installation

The followings are instructions for setting up ZYCOO CooVox-U100 
IP PBX. Please refer to the illustration and follow the simple steps 
below to quickly install your IP phone system.

2.1 Safety Precautions

Notes:

To avoid any device damage and bodily injury caused by improper 
use, please observe the following rules.

Keep the power off during the installation. 
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good 
skin contact and is well grounded.
Use only the power cord provided with IP PBX .
Make sure that the supply voltage matches the specifications indicated on the rear 
panel of IP PBX.
Confirm  not  to  bring  about  the  overload  of  power  circuit  before  turning  on  the 
power of IP PBX, to avoid the unnecessary damage.
To avoid the electric accident, do not open or remove the cover of IP PBX when it is 
working as well as off the power.
Before  cleaning  the  device,  cut  off  the  power  supply.  Do  not  clean  it  by  the 
waterish cloth, and never use any other liquid cleaning method.

Site Requirements

40 C

0 C

PWR

SYS

WAN

LAN

4         3        2          1

4         3        2          1

SLOT2

SLOT1

CooVox

IP Phone System