background image

ZyWALL 10~100 Series Internet Security Gateway 

Log Descriptions 

 

13-1 

Chapter 13

 

Log Descriptions 

 

Chart 13-1 System Error Logs 

LOG MESSAGE 

DESCRIPTION 

%s exceeds the max. 

number of session per 

host! 

This attempt to create a NAT session exceeds the maximum number of 
NAT session table entries allowed to be created per host. 

 

Chart 13-2 System Maintenance Logs 

LOG MESSAGE 

DESCRIPTION 

Time calibration is 

successful 

The router has adjusted its time based on information from the time 
server. 

Time calibration 

failed 

The router failed to get information from the time server. 

DHCP client gets %s 

A DHCP client got a new IP address from the DHCP server. 

DHCP client IP 

expired 

A DHCP client's IP address has expired. 

DHCP server assigns 

%s 

The DHCP server assigned an IP address to a client. 

SMT Login 

Successfully 

Someone has logged on to the router's SMT interface. 

SMT Login Fail 

Someone has failed to log on to the router's SMT interface. 

WEB Login 

Successfully 

Someone has logged on to the router's web configurator interface. 

WEB Login Fail 

Someone has failed to log on to the router's web configurator interface. 

TELNET Login 

Successfully 

Someone has logged on to the router via telnet. 

Summary of Contents for 10 Series

































































































Reviews: