background image

Legal Notices | Gateway 400

 

User Guide

51

2. Basic Permissions.

All rights granted under this License are granted for the term of copyright on the 
Program, and are irrevocable provided the stated conditions are met. This License 
explicitly affirms your unlimited permission to run the unmodified Program. The 
output from running a covered work is covered by this License only if the output, 
given its content, constitutes a covered work. This License acknowledges your 
rights of fair use or other equivalent, as provided by copyright law.

You may make, run and propagate covered works that you do not convey, without 
conditions so long as your license otherwise remains in force. You may convey 
covered works to others for the sole purpose of having them make modifications 
exclusively for you, or provide you with facilities for running those works, provided 
that you comply with the terms of this License in conveying all material for which 
you do not control copyright. Those thus making or running the covered works for 
you must do so exclusively on your behalf, under your direction and control, on 
terms that prohibit them from making any copies of your copyrighted material out-
side their relationship with you.

Conveying under any other circumstances is permitted solely under the conditions 
stated below. Sublicensing is not allowed; section 10 makes it unnecessary.

3. Protecting Users’ Legal Rights From Anti-Circumvention Law.

No covered work shall be deemed part of an effective technological measure un-
der any applicable law fulfilling obligations under article 11 of the WIPO copyright 
treaty adopted on 20 December 1996, or similar laws prohibiting or restricting cir-
cumvention of such measures.

When you convey a covered work, you waive any legal power to forbid circumven-
tion of technological measures to the extent such circumvention is effected by ex-
ercising rights under this License with respect to the covered work, and you 
disclaim any intention to limit operation or modification of the work as a means of 
enforcing, against the work’s users, your or third parties’ legal rights to forbid cir-
cumvention of technological measures.

4. Conveying Verbatim Copies.

You may convey verbatim copies of the Program’s source code as you receive it, 
in any medium, provided that you conspicuously and appropriately publish on 
each copy an appropriate copyright notice; keep intact all notices stating that this 
License and any non-permissive terms added in accord with section 7 apply to the 
code; keep intact all notices of the absence of any warranty; and give all recipients 
a copy of this License along with the Program.

You may charge any price or no price for each copy that you convey, and you may 
offer support or warranty protection for a fee.

5. Conveying Modified Source Versions.

You may convey a work based on the Program, or the modifications to produce it 
from the Program, in the form of source code under the terms of section 4, provid-
ed that you also meet all of these conditions:

a) The work must carry prominent notices stating that you modified it, and giving 
a relevant date.

b) The work must carry prominent notices stating that it is released under this Li-
cense and any conditions added under section 7. This requirement modifies the 
requirement in section 4 to “keep intact all notices”.

c) You must license the entire work, as a whole, under this License to anyone who 
comes into possession of a copy. This License will therefore apply, along with any 
applicable section 7 additional terms, to the whole of the work, and all its parts, 
regardless of how they are packaged. This License gives no permission to license 
the work in any other way, but it does not invalidate such permission if you have 
separately received it.

d) If the work has interactive user interfaces, each must display Appropriate Legal 
Notices; however, if the Program has interactive interfaces that do not display Ap-
propriate Legal Notices, your work need not make them do so.

A compilation of a covered work with other separate and independent works, 
which are not by their nature extensions of the covered work, and which are not 
combined with it such as to form a larger program, in or on a volume of a storage 
or distribution medium, is called an “aggregate” if the compilation and its resulting 
copyright are not used to limit the access or legal rights of the compilation’s users 
beyond what the individual works permit. Inclusion of a covered work in an aggre-
gate does not cause this License to apply to the other parts of the aggregate.

6. Conveying Non-Source Forms.

You may convey a covered work in object code form under the terms of sections 
4 and 5, provided that you also convey the machine-readable Corresponding 
Source under the terms of this License, in one of these ways:

a) Convey the object code in, or embodied in, a physical product (including a phys-
ical distribution medium), accompanied by the Corresponding Source fixed on a 
durable physical medium customarily used for software interchange.

b) Convey the object code in, or embodied in, a physical product (including a phys-
ical distribution medium), accompanied by a written offer, valid for at least three 
years and valid for as long as you offer spare parts or customer support for that 
product model, to give anyone who possesses the object code either (1) a copy of 
the Corresponding Source for all the software in the product that is covered by this 
License, on a durable physical medium customarily used for software interchange, 
for a price no more than your reasonable cost of physically performing this con-
veying of source, or (2) access to copy the Corresponding Source from a network 
server at no charge.

c) Convey individual copies of the object code with a copy of the written offer to 
provide the Corresponding Source. This alternative is allowed only occasionally 
and noncommercially, and only if you received the object code with such an offer, 
in accord with subsection 6b.

d) Convey the object code by offering access from a designated place (gratis or 
for a charge), and offer equivalent access to the Corresponding Source in the 
same way through the same place at no further charge. You need not require re-
cipients to copy the Corresponding Source along with the object code. If the place 
to copy the object code is a network server, the Corresponding Source may be on 
a different server (operated by you or a third party) that supports equivalent copy-
ing facilities, provided you maintain clear directions next to the object code saying 
where to find the Corresponding Source. Regardless of what server hosts the Cor-
responding Source, you remain obligated to ensure that it is available for as long 
as needed to satisfy these requirements.

e) Convey the object code using peer-to-peer transmission, provided you inform 
other peers where the object code and Corresponding Source of the work are be-
ing offered to the general public at no charge under subsection 6d.

A separable portion of the object code, whose source code is excluded from the 
Corresponding Source as a System Library, need not be included in conveying the 
object code work.

A “User Product” is either (1) a “consumer product”, which means any tangible 
personal property which is normally used for personal, family, or household pur-
poses, or (2) anything designed or sold for incorporation into a dwelling. In deter-
mining whether a product is a consumer product, doubtful cases shall be resolved 
in favor of coverage. For a particular product received by a particular user, “nor-
mally used” refers to a typical or common use of that class of product, regardless 
of the status of the particular user or of the way in which the particular user actually 
uses, or expects or is expected to use, the product. A product is a consumer prod-
uct regardless of whether the product has substantial commercial, industrial or 
non-consumer uses, unless such uses represent the only significant mode of use 
of the product.

“Installation Information” for a User Product means any methods, procedures, au-
thorization keys, or other information required to install and execute modified ver-
sions of a covered work in that User Product from a modified version of its 
Corresponding Source. The information must suffice to ensure that the continued 
functioning of the modified object code is in no case prevented or interfered with 
solely because modification has been made.

If you convey an object code work under this section in, or with, or specifically for 
use in, a User Product, and the conveying occurs as part of a transaction in which 
the right of possession and use of the User Product is transferred to the recipient 
in perpetuity or for a fixed term (regardless of how the transaction is character-
ized), the Corresponding Source conveyed under this section must be accompa-
nied by the Installation Information. But this requirement does not apply if neither 
you nor any third party retains the ability to install modified object code on the User 
Product (for example, the work has been installed in ROM).

The requirement to provide Installation Information does not include a requirement 
to continue to provide support service, warranty, or updates for a work that has 
been modified or installed by the recipient, or for the User Product in which it has 
been modified or installed. Access to a network may be denied when the modifi-
cation itself materially and adversely affects the operation of the network or vio-
lates the rules and protocols for communication across the network.

Corresponding Source conveyed, and Installation Information provided, in accord 
with this section must be in a format that is publicly documented (and with an im-
plementation available to the public in source code form), and must require no 
special password or key for unpacking, reading or copying.

7. Additional Terms.

“Additional permissions” are terms that supplement the terms of this License by 
making exceptions from one or more of its conditions. Additional permissions that 
are applicable to the entire Program shall be treated as though they were included 
in this License, to the extent that they are valid under applicable law. If additional 
permissions apply only to part of the Program, that part may be used separately 
under those permissions, but the entire Program remains governed by this Li-
cense without regard to the additional permissions.

When you convey a copy of a covered work, you may at your option remove any 
additional permissions from that copy, or from any part of it. (Additional permis-
sions may be written to require their own removal in certain cases when you mod-
ify the work.) You may place additional permissions on material, added by you to 
a covered work, for which you have or can give appropriate copyright permission.

Notwithstanding any other provision of this License, for material you add to a cov-
ered work, you may (if authorized by the copyright holders of that material) sup-
plement the terms of this License with terms:

a) Disclaiming warranty or limiting liability differently from the terms of sections 15 
and 16 of this License; or

b) Requiring preservation of specified reasonable legal notices or author attribu-
tions in that material or in the Appropriate Legal Notices displayed by works con-
taining it; or

c) Prohibiting misrepresentation of the origin of that material, or requiring that 
modified versions of such material be marked in reasonable ways as different from 
the original version; or

d) Limiting the use for publicity purposes of names of licensors or authors of the 
material; or

Summary of Contents for 400





































































Reviews: