Chapter 10 Network Address Translation (NAT)
AMG1001-T/AMG1011-T Series User’s Guide
70
Use this screen to change your AMG1001-T/AMG1011-T’s address mapping settings. Click
Advanced Setup > NAT > IP Address Mapping
to open the following screen.
Figure 38
Advanced Setup > NAT > IP Address Mapping
The following table describes the fields in this screen.
Table 25
Network > NAT > Address Mapping
LABEL
DESCRIPTION
IP Address Mapping
Address
Mapping Rule
The rules configured in this screen apply to this PVC.
Rule Index
Select the rule’s index number from the drop-down list box.
Rule Type
Choose the port mapping type from one of the following.
One-to-One
: This mode maps one local IP address to one public IP address. Note that port
numbers do not change for one-to-one NAT mapping type.
Many-to-One
: This mode maps multiple local IP addresses to one public IP address. This is
equivalent to the
Single IP
feature that previous ZyXEL routers supported only.
Many-to-Many Overload
: This mode maps multiple local IP addresses to shared public IP
addresses.
Many-to-Many No Overload
: This mode maps each local IP address to unique public IP
addresses.
Server
: This type allows you to specify inside servers of different services behind the NAT
to be accessible to the outside world.
Local Start IP
This is the starting local IP address. Local IP addresses are
N/A
for
Server
port mapping.
Local End IP
This is the end local IP address. If your rule is for all local IP addresses, then enter 0.0.0.0
as the
Local Start IP
address and 255.255.255.255 as the
Local End IP
address.
This field is
N/A
for
One-to-One
and
Server
mapping types.
Public Start IP
This is the starting public IP address. Enter 0.0.0.0 here if you have a dynamic IP address
from your ISP.
Summary of Contents for AMG1001-T Series
