Chapter 11 Quality of Service (QoS)
AMG1001-T/AMG1011-T Series User’s Guide
75
• Use t
he
QoS Settings Summary
screen (
Section 11.2.1 on page 78
) to check the summary of
QoS rules and actions you configured for the AMG1001-T/AMG1011-T.
11.1.2 What You Need to Know About QoS
802.1p
QoS is used to prioritize source-to-destination traffic flows. All packets in the same flow are given
the same priority. 802.1p is a way of managing traffic in a network by grouping similar types of
traffic together and treating each type as a class. You can use 802.1p to give different priorities to
different packet types.
Tagging and Marking
In a QoS class, you can configure whether to add or change the DiffServ Code Point (DSCP) value,
IEEE 802.1p priority level and VLAN ID number in a matched packet. When the packet passes
through a compatible network, the networking device, such as a backbone switch, can provide
specific treatment or service based on the tag or marker.
Finding Out More
See
Section 11.3 on page 79
for advanced technical information on QoS.
Summary of Contents for AMG1001-T Series
