manualshive.com logo in svg

ZyXEL Communications AMG1202-T series, User Manual

The ZyXEL Communications AMG1202-T series is a comprehensive networking solution featuring high-speed internet connectivity. Easily get started with the Quick Start Manual, available for free download on our website. This user-friendly manual serves as a handy guide for effortlessly setting up and optimizing your device's performance.

Share
Download
background image

Chapter 7 Wireless LAN

AMG1302/AMG1202-TSeries User’s Guide

110

her favorite movie is Vanishing Point (which you know was made in 1971) you could use 
“70dodchal71vanpoi” as your security key.

The following sections introduce different types of wireless security you can set up in the wireless 
network.

7.10.3.1  SSID

Normally, the AMG1302/AMG1202-TSeries acts like a beacon and regularly broadcasts the SSID in 
the area. You can hide the SSID instead, in which case the AMG1302/AMG1202-TSeries does not 
broadcast the SSID. In addition, you should change the default SSID to something that is difficult 
to guess.

This type of security is fairly weak, however, because there are ways for unauthorized wireless 
devices to get the SSID. In addition, unauthorized wireless devices can still see the information that 
is sent in the wireless network.

7.10.3.2  MAC Address Filter

Every device that can use a wireless network has a unique identification number, called a MAC 
address.

1

 A MAC address is usually written using twelve hexadecimal characters

2

; for example, 

00A0C5000002 or 00:A0:C5:00:00:02. To get the MAC address for each device in the wireless 
network, see the device’s User’s Guide or other documentation.

You can use the MAC address filter to tell the AMG1302/AMG1202-TSeries which devices are 
allowed or not allowed to use the wireless network. If a device is allowed to use the wireless 
network, it still has to have the correct information (SSID, channel, and security). If a device is not 
allowed to use the wireless network, it does not matter if it has the correct information.

This type of security does not protect the information that is sent in the wireless network. 
Furthermore, there are ways for unauthorized wireless devices to get the MAC address of an 
authorized device. Then, they can use that MAC address to use the wireless network.

7.10.3.3  User Authentication

Authentication is the process of verifying whether a wireless device is allowed to use the wireless 
network. You can make every user log in to the wireless network before using it. However, every 
device in the wireless network has to support IEEE 802.1x to do this.

For wireless networks, you can store the user names and passwords for each user in a RADIUS 
server. This is a server used in businesses more than in homes. If you do not have a RADIUS server, 
you cannot set up user names and passwords for your users.

Unauthorized wireless devices can still see the information that is sent in the wireless network, 
even if they cannot use the wireless network. Furthermore, there are ways for unauthorized 
wireless users to get a valid user name and password. Then, they can use that user name and 
password to use the wireless network.

1.

Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds 
of wireless devices might not have MAC addresses.

2.

Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F.

Summary of Contents for AMG1202-T series

































































































































































































































































































































Reviews:

No comments

Related manuals for AMG1202-T series

CTC Union FRM220A-Eoe1/G User Manual preview
FRM220A-Eoe1/G
Brand: CTC Union Pages: 4
Rath 2100-LTEVER4 Installation & Operation Manual preview
2100-LTEVER4
Brand: Rath Pages: 9
Monitor SiloTrack CLOUD Installation And Operation Manual preview
SiloTrack CLOUD
Brand: Monitor Pages: 10
Leviton 10/100Mbps 4-Port Internet Gateway Instructions Manual preview
10/100Mbps 4-Port Internet Gateway
Brand: Leviton Pages: 10
T-VIPS CP560 User Manual preview
CP560
Brand: T-VIPS Pages: 200
Internode TG-789 Quick Setup Manual preview
TG-789
Brand: Internode Pages: 12
Cell2Tel C2T-XT2000 Quick Start Manual preview
C2T-XT2000
Brand: Cell2Tel Pages: 34
ActionTec DSL Gateway Quick Start Manual preview
DSL Gateway
Brand: ActionTec Pages: 2
ActiGraph CentrePoint Data Hub User Manual preview
CentrePoint Data Hub
Brand: ActiGraph Pages: 14
Omega GW-001 Series User Manual preview
GW-001 Series
Brand: Omega Pages: 38
Wildix W02BRI Quick Installation Manual preview
W02BRI
Brand: Wildix Pages: 3
BellEquip e-2-s User Manual preview
e-2-s
Brand: BellEquip Pages: 20
Appareo GW03 Installation Manual preview
GW03
Brand: Appareo Pages: 9
THOMSON TG787 Setup And User Manual preview
TG787
Brand: THOMSON Pages: 88
THOMSON TG784-SIP Cli Reference Manual preview
TG784-SIP
Brand: THOMSON Pages: 946
RTA 460ECBC-NNA1 Product User Manual preview
460ECBC-NNA1
Brand: RTA Pages: 66
Asyst Technologies Advantag 9100 Technical Manual preview
Advantag 9100
Brand: Asyst Technologies Pages: 51
RTA 460BSA Product User Manual preview
460BSA
Brand: RTA Pages: 86

Brands by name

Popular brands

Load more brands