Chapter 10 Quality of Service (QoS)
AMG1312-T Series User’s Guide
138
The following table describes the labels in this screen.
10.3 The Queue Screen
Use this screen to configure QoS queue assignment disciplines and priorities.
Click
Network Setting > QoS > Queue
to open the screen as shown next.
Figure 64
Network Setting > QoS > Queue
The following table describes the labels in this screen.
Table 43
Network Setting > QoS > General
LABEL
DESCRIPTION
Active QoS
Use this field to turn on QoS to improve your network performance.
Traffic priority will be
automatically assigned by
Select how the AMG1312-T Series assigns priorities to various incoming and
outgoing traffic flows.
•
None
: Disables auto priority mapping and has the AMG1312-T Series put
packets into the queues according to your classification rules. Traffic which
does not match any of the classification rules is mapped into the default
queue with the lowest priority.
•
Ethernet Priority
: Automatically assign priority based on the IEEE 802.1p
priority level.
•
IP Precedence
: Automatically assign priority based on the first three bits of
the TOS field in the IP header.
•
Packet Length
: Automatically assign priority based on the packet size.
Smaller packets get higher priority since control, signaling, VoIP, internet
gaming, or other real-time packets are usually small while larger packets are
usually best effort data packets like file transfers.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Table 44
Network Setting > QoS > Queue
LABEL
DESCRIPTION
#
This is the index number of the entry.
Status
This field displays whether the queue is active or not. A yellow bulb signifies that this queue is
active. A gray bulb signifies that this queue is not active.
Name
This shows the descriptive name of this queue.
Interface
This shows the name of the AMG1312-T Series’s interface through which traffic in this queue
passes.
Priority
This shows the priority of this queue.
Weight
This shows the weight of this queue.
Summary of Contents for AMG1312-T Series
