Chapter 25 Remote Management
AMG1312-T Series User’s Guide
219
Figure 128
Maintenance > RemoteMGMT > SSH
The following table describes the labels in this screen.
25.8.1 SSH Example
This section shows an example using a graphical interface SSH client program to remotely access
the ZyXEL Device. The configuration and connection steps are similar for most SSH client programs.
Refer to your SSH client program user’s guide.
1
Enter the IP address and port number. Select
SSH
.
Table 95
Maintenance > RemoteMGMT > SSH
LABEL
DESCRIPTION
Server Port
This displays the service port number for accessing the AMG1312-T Series. If the number
is grayed out, it is not editable.
Server Access
Select the interface(s) through which a computer may access the AMG1312-T Series
using this service.
Note: It is recommended if you are allowing WAN access even temporarily to change the
default password (in
Maintenance
>
User Account
). To allow access from the
WAN, you will need to configure a WAN to Router firewall rule. See
for information on configuring firewall rules.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
AMG1312-T Series using this service.
Select
All
to allow any computer to access the AMG1312-T Series using this service.
Choose
Range
to just allow the computer(s) with an IP address in the range that you
specify to access the AMG1312-T Series using this service.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Summary of Contents for AMG1312-T Series
