Chapter 4 Tutorials
AMG1312-T Series User’s Guide
59
This maps e-mail traffic to queue 1 created in the previous screen (see the
Source Port Range
field). This also maps your computer’s MAC address to queue 1 (see the
Source MAC Address
field).
4.11 Access the AMG1312-T Series from the Internet Using
DDNS
If you connect your AMG1312-T Series to the Internet and it uses a dynamic WAN IP address, it is
inconvenient for you to manage the device from the Internet. The AMG1312-T Series’s WAN IP
address changes dynamically. Dynamic DNS (DDNS) allows you to access the AMG1312-T Series
using a domain name.
To use this feature, you have to apply for DDNS service at www.dyndns.org.
This tutorial shows you how to:
•
Registering a DDNS Account on www.dyndns.org
•
Configuring DDNS on Your AMG1312-T Series
•
Note: If you have a private WAN IP address, then you cannot use DDNS.
4.11.1 Registering a DDNS Account on www.dyndns.org
1
Open a browser and type
http://www.dyndns.org
.
Interface
Select
From LAN
.
To Queue
Link this to a queue created in the
Network Setting > QoS
> Queue Setup
screen, which is the
1
queue created in
this example.
Source MAC Address
Type the MAC address of your computer -
AA:FF:AA:FF:AA:FF
. Type the
Source
Mac Netmask
if
you know it.
Source Port Range
Enter the port number to which the rule should be applied -
25
for SMTP.
Protocol ID
Select the IP protocol type -
TCP
.
w.x.y.z
a.b.c.d
http://zyxelrouter.dyndns.org
A
Summary of Contents for AMG1312-T Series
