Chapter 6 Broadband
AMG1312-T Series User’s Guide
73
6.2.1 Advanced Setup
Use this screen to edit your AMG1312-T Series's advanced WAN settings. Click the
Advanced
Setup
button in the
Internet Connection
screen. The screen appears as shown.
WAN Identifier
If you selected
Manual
, enter the WAN Identifier in this field. The WAN identifier
should be unique and 64 bits in hexadecimal form. Every 16 bit block should be
separated by a colon as in XXXX:XXXX:XXXX:XXXX where X is a hexadecimal
character. Blocks of zeros can be represented with double colons as in
XXXX:XXXX::XXXX.
Bridge and Routing mode in the same WAN (ENET ENCAP and PPPoE encapsulation only)
This feature allows you to set some LAN port(s) and/or SSID(s) to be in bridge mode with the WAN interface,
while other LAN port(s) and SSID(s) can still use Firewall, DHCP server and NAT on the AMG1312-T Series.
Enable Con-current
WAN
Select this option to bridge traffic between the WAN interface and certain Ethernet
port(s) and/or SSID(s). Other ports and SSIDs will be still in router mode with the
WAN interface.
Note: The port binding feature will be disabled automatically when you select this
option.
Connection (PPPoA and PPPoE encapsulation only)
Keep Alive
Select
Keep Alive
when you want your connection up all the time. The AMG1312-T
Series will try to bring up the connection automatically if it is disconnected.
Note: Do not specify an always-on connection unless your telephone company offers
flat-rate service or you need a constant connection and the cost is of no
concern.
Connect on Demand
Select
Connect on Demand
when you don't want the connection up all the time and
specify an idle time-out in seconds.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Advanced Setup
Click this to display the
Advanced WAN Setup
screen and edit more details of your
WAN setup. Click this button again to display less fields in this screen.
Table 11
Network Setting > Broadband > Internet Connection (continued)
LABEL
DESCRIPTION
Summary of Contents for AMG1312-T Series
