Chapter 6 Broadband
AMG1312-T Series User’s Guide
74
Figure 20
Network Setting > Broadband > Internet Connection: Advanced Setup
The following table describes the labels in this screen.
Table 12
Network Setting > Broadband > Internet Connection: Advanced Setup
LABEL
DESCRIPTION
RIP Direction
RIP (Routing Information Protocol) allows a router to exchange routing information
with other routers. Use this field to control how much routing information the
AMG1312-T Series sends and receives on the subnet.
Select the RIP direction from
None
,
Both
,
In Only
and
Out Only
.
RIP Version
This field is not configurable if you select
None
in the
RIP Direction
field.
Select the RIP version from
RIP-1
,
RIP2-B
and
RIP2-M
.
Multicast
Multicast packets are sent to a group of computers on the LAN and are an alternative
to unicast packets (packets sent to one computer) and broadcast packets (packets
sent to every computer).
Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to establish
membership in a multicast group. The AMG1312-T Series supports
IGMP-v1
,
IGMP-
v2
and
IGMP-v3
. Select
None
to disable it.
MLD Proxy
Select the version of MLD proxy (v1 or v2) to have the AMG1312-T Series act as for
this connection. This allows the AMG1312-T Series to get subscription information and
maintain a joined member list for each multicast group. It can reduce multicast traffic
significantly. Select
None
to turn off MLD proxy.
ATM QoS
ATM QoS Type
Select
CBR
(Continuous Bit Rate) to specify fixed (always-on) bandwidth for voice or
data traffic. Select
UBR With PCR
(Unspecified Bit Rate) for applications that are
non-time sensitive, such as e-mail. Select
Realtime VBR
(real-time Variable Bit
Rate) type for applications with bursty connections that require closely controlled
delay and delay variation. Select
Non Realtime VBR
(non real-time Variable Bit
Rate) type for connections that do not require closely controlled delay and delay
variation.
Peak Cell Rate
Divide the DSL line rate (bps) by 424 (the size of an ATM cell) to find the Peak Cell
Rate (PCR). This is the maximum rate at which the sender can send cells. Type the
PCR here.
Summary of Contents for AMG1312-T Series
