Chapter 11 Network Address Translation (NAT)
AMG1312-T Series User’s Guide
151
Figure 72
Network Setting > NAT > Port Forwarding: Add/Edit
The following table describes the fields in this screen.
Table 53
Network Setting > NAT > Port Forwarding: Edit
LABEL
DESCRIPTION
Active
Click this check box to enable the rule.
Service Name
Enter a name to identify this port-forwarding rule.
External Start
Port
Enter a port number in this field.
To forward only one port, enter the port number again in the
End Port
field.
To forward a series of ports, enter the start port number here and the end port number in
the
End Port
field.
External End Port Enter a port number in this field.
To forward only one port, enter the port number in the
Start
Port
field above and then
enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with the
port number in the
Start Port
field above.
Server IP
Address
Enter the IP address of the server in your local network.
Trigger Protocol
Select the protocol of the service,
TCP
,
UDP
or
ALL
(TCP+UDP).
Open Start Port
Enter the first port number here to which you want the device to translate the incoming
port. For a range of ports, you only need to enter the first number of the range to which
you want the incoming ports translated, the device automatically calculates the last port of
the translated port range.
Open End Port
Enter the last port number here to which you want the device to translate the incoming
port. For a range of ports, you only need to enter the first number of the range to which
you want the incoming ports translated, the device automatically calculates the last port of
the translated port range.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Summary of Contents for AMG1312-T Series
