Auto Provisioning Administrator’s Guide
16
Chapter 1 Auto Provisioning
Figure 1
Provisioning Utility Scenario
1.2.1 Provisioning Utility System Usage
Use the following steps to set up auto provisioning using the provisioning utility.
Note:
You must use the Command Line Interface (CLI)
autopro
command to pre-
configure the ZyXEL VoIP devices to get the configuration files from the server
(see
Figure 2
Provisioning Utility Set Up
1
Create an account file containing settings such as the username, password and SIP
number (see
for details). You can export data from your Customer
Relationship Management (CRM) database to use in the account file.
2
Create a common file with general SIP settings such as the SIP server’s IP address, port
number, codec and timeout (see
).
Summary of Contents for APS 1.0
