Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
138
6.15 AP Information: AP List
The
AP Information
menu contains
AP List, Radio List, Top N APs
and
Single AP
screens. Click
Monitor >
Wireless > AP Information
to display the
AP List
screen.
Figure 112
Monitor > Wireless > AP Information > AP List
The following table describes the labels in this screen.
FQDN Object
Select an object from the drop-down list box to display related IPv6 FQDN object
caches used in DNS queries.
#
This is the index number of the IPv6 FQDN entry.
Name
This field displays the name of the selected IPv6 FQDN object used in DNS queries.
FQDN
This field displays a host’s fully qualified domain name.
IP Address
This field displays the mapping of the FQDN to an IPv6 address. This is the IPv6 address
of a host.
TTL
This field displays the number of seconds the Zyxel Device holds IP address - FQDN
object mapping in its cache. The mapping is updated when the TTL (Time To Live)
setting expires.
Refresh
Click this button to update the information in the screen.
Table 41 Monitor > System Status > FQDN Object
LABEL
DESCRIPTION
Table 42 Monitor > Wireless > AP Information > AP List
LABEL
DESCRIPTION
Config AP
Select an AP and click this to change the selected AP’s group, radio, VLAN and port
settings.
Add to Mgnt AP List
Click this to add new Access Points
More Information
Click this icon to see AP Information and Station count.
Reboot
Select an AP and click this button to force it to restart.
DCS Now
Select one or multiple APs and click this button to use DCS (Dynamic Channel
Selection) to allow the AP to automatically find a less-used channel in an
environment where there are many APs and there may be interference.
Note: You should have enabled DCS in the applied AP radio profile before
the APs can use DCS.
Note: DCS is not supported on the radio which is working in repeater AP
mode.
