manualshive.com logo in svg

ZyXEL Communications ATP200, User Manual

The ZyXEL Communications ATP200 User Manual is a comprehensive guide that provides step-by-step instructions for setting up and utilizing the features of this cutting-edge product. Download it for free from our website to maximize your ATP200 experience.

Share
Download
background image

 Chapter 9 Interfaces

ZyWALL ATP Series User’s Guide

245

The following table describes the labels in this screen.

Table 101   Configuration > Network > Interface > Cellular > Add / Edit

LABEL

DESCRIPTION

Show Advanced 
Settings / Hide 
Advanced Settings

Click this button to display a greater or lesser number of configuration fields.

General Settings

Enable Interface

Select this option to turn on this interface.

Interface Properties

Interface Name

Select a name for the interface. 

Zone

Select the zone to which you want the cellular interface to belong. The zone determines 
the security settings the Zyxel Device uses for the interface.

Extension Slot

This is the USB slot that you are configuring for use with a mobile broadband card.

Connected 

Device

This displays the manufacturer and model name of your mobile broadband card if you 
inserted one in the Zyxel Device. Otherwise, it displays 

none

.

Description

Enter a description of this interface. It is not used elsewhere. You can use alphanumeric and 

()+/:=?!*#@$_%-

 characters, and it can be up to 60 characters long.

Connectivity

Nailed-Up

Select this if the connection should always be up. Clear this to have the Zyxel Device to 
establish the connection only when there is traffic. You might not nail up the connection if 
there is little traffic through the interface or if it costs money to keep the connection 
available.

Idle timeout

This value specifies the time in seconds (0~360) that elapses before the Zyxel Device 
automatically disconnects from the ISP’s server. Zero disables the idle timeout. 

ISP Settings 

Profile Selection

Select 

Device

 to use one of the mobile broadband device’s profiles of device settings. 

Then select the profile (use 

Profile 1

 unless your ISP instructed you to do otherwise).

Select 

Custom

 to configure your device settings yourself.

APN

This field is read-only if you selected 

Device 

in the profile selection. Select 

Custom

 in the 

profile selection to be able to manually input the APN (Access Point Name) provided by 
your service provider. This field applies with a GSM or HSDPA mobile broadband card. Enter 
the APN from your service provider. Connections with different APNs may provide different 
services (such as Internet access or MMS (Multi-Media Messaging Service)) and charge 
method.

You can enter up to 63 ASCII printable characters. Spaces are allowed.

Dial String

Enter the dial string if your ISP provides a string, which would include the APN, to initialize the 
mobile broadband card.

You can enter up to 63 ASCII printable characters. Spaces are allowed.

This field is available only when you insert a GSM mobile broadband card.

Authentication 

Type

The Zyxel Device supports PAP (Password Authentication Protocol) and CHAP (Challenge 
Handshake Authentication Protocol). CHAP is more secure than PAP; however, PAP is 
readily available on more platforms.

Use the drop-down list box to select an authentication protocol for outgoing calls. Options 
are:

None:

 No authentication for outgoing calls.

CHAP

 - Your Zyxel Device accepts CHAP requests only. 

PAP

 - Your Zyxel Device accepts PAP requests only. 

Summary of Contents for ATP200





















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ATP200

StarTech.com EC13942A2 Instruction Manual preview
EC13942A2
Brand: StarTech.com Pages: 2
McAfee Data Loss Prevention Prevent Quick Start Manual preview
Data Loss Prevention Prevent
Brand: McAfee Pages: 8
Fortinet FortiBridge-1000 Quick Start Manual preview
FortiBridge-1000
Brand: Fortinet Pages: 2
IBM Proventia Management SiteProtector SP2001 Hardware Configuration Manual preview
Proventia Management SiteProtector SP2001
Brand: IBM Pages: 57
Fortinet FortiBridge 1000 Installation Manual preview
FortiBridge 1000
Brand: Fortinet Pages: 56
Nexcom NI 121F User Manual preview
NI 121F
Brand: Nexcom Pages: 76
NETGEAR ProSafe FVS318N Setup Manual preview
ProSafe FVS318N
Brand: NETGEAR Pages: 9
Lanner NCA-2513 User Manual preview
NCA-2513
Brand: Lanner Pages: 84
Check Point Smart-1 5050 Manual preview
Smart-1 5050
Brand: Check Point Pages: 2
Check Point 15400 Replacing preview
15400
Brand: Check Point Pages: 7
PaloAlto Networks PA-400 Series Quick Start Manual preview
PA-400 Series
Brand: PaloAlto Networks Pages: 2
Fortinet FortiGate FortiGate-ADM-XB2 Quick Start Manual preview
FortiGate FortiGate-ADM-XB2
Brand: Fortinet Pages: 1
Fortinet FortiGate FortiGate-5003 Quick Start Manual preview
FortiGate FortiGate-5003
Brand: Fortinet Pages: 2
AirTies RT-103 User Manual preview
RT-103
Brand: AirTies Pages: 28
NETGEAR ProSafe FM114P Specifications preview
ProSafe FM114P
Brand: NETGEAR Pages: 2
NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Specifications preview
FVX538v2 - ProSafe VPN Firewall Dual WAN
Brand: NETGEAR Pages: 2
NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Introduction Manual preview
FWG114Pv2 - Wireless Firewall With USB Print Server
Brand: NETGEAR Pages: 10
NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Reference Manual preview
FVS338 - ProSafe VPN Firewall 50 Router
Brand: NETGEAR Pages: 10

Brands by name

Popular brands

Load more brands