manualshive.com logo in svg

ZyXEL Communications ATP200, User Manual

The ZyXEL Communications ATP200 User Manual is a comprehensive guide that provides step-by-step instructions for setting up and utilizing the features of this cutting-edge product. Download it for free from our website to maximize your ATP200 experience.

Share
Download
background image

Chapter 9 Interfaces

ZyWALL ATP Series User’s Guide

280

Pool Size

Enter the number of IP addresses to allocate. This number must be at least one and is 
limited by the interface’s 

Subnet Mask

. For example, if the 

Subnet Mask

 is 255.255.255.0 and 

IP Pool Start Address

 is 10.10.10.10, the Zyxel Device can allocate 10.10.10.10 to 

10.10.10.254, or 245 IP addresses.

If this field is blank, the 

IP Pool Start Address

 must also be blank. In this case, the Zyxel Device 

can assign every IP address allowed by the interface’s IP address and subnet mask, except 
for the first address (network address), last address (broadcast address) and the interface’s 
IP address.

First DNS Server

Second DNS 

Server

Third DNS Server

Specify the IP addresses up to three DNS servers for the DHCP clients to use. Use one of the 
following ways to specify these IP addresses.

Custom Defined

 - enter a static IP address.

From ISP

 - select the DNS server that another interface received from its DHCP server.

Zyxel Device

 - the DHCP clients use the IP address of this interface and the Zyxel Device 

works as a DNS relay.

First WINS Server, 

Second WINS 

Server 

Type the IP address of the WINS (Windows Internet Naming Service) server that you want to 
send to the DHCP clients. The WINS server keeps a mapping table of the computer names 
on your network and the IP addresses that they are currently using. 

Default Router

If you set this interface to 

DHCP Server

, you can select to use either the interface’s IP 

address or another IP address as the default router. This default router will become the 
DHCP clients’ default gateway.

To use another IP address as the default router, select 

Custom Defined

 and enter the IP 

address.

Lease time

Specify how long each computer can use the information (especially the IP address) 
before it has to request the information again. Choices are:

infinite

 - select this if IP addresses never expire

days, hours, and minutes

 - select this to enter how long IP addresses are valid.

Extended 

Options

This table is available if you selected 

DHCP server

.

Configure this table if you want to send more information to DHCP clients through DHCP 
packets.

 Add

Click this to create an entry in this table. See 

Section 9.3.6 on page 232

.

 Edit

Select an entry in this table and click this to modify it.

 Remove

Select an entry in this table and click this to delete it.

 #

This field is a sequential value, and it is not associated with any entry.

 Name

This is the option’s name.

 Code

This is the option’s code number.

 Type

This is the option’s type.

 Value

This is the option’s value.

PXE Server

PXE (Preboot eXecution Environment) allows a client computer to use the network to boot 
up and install an operating system via a PXE-capable Network Interface Card (NIC).

PXE is available for computers on internal interfaces to allow them to boot up using boot 
software on a PXE server. The Zyxel Device acts as an intermediary between the PXE server 
and the computers that need boot software.

The PXE server must have a public IPv4 address. You must enable 

DHCP Server 

on the Zyxel 

Device so that it can receive information from the PXE server.

PXE Boot Loader 

File

A boot loader is a computer program that loads the operating system for the computer. 
Type the exact file name of the boot loader software file, including filename extension, that 
is on the PXE server. If the wrong filename is typed, then the client computers cannot boot.

Table 110   Configuration > Network > Interface > Bridge > Add / Edit (continued)

LABEL

DESCRIPTION

Summary of Contents for ATP200





















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ATP200

Watchguard Firebox M5800 Hardware Manual preview
Firebox M5800
Brand: Watchguard Pages: 18
Watchguard Firebox V10 Command Line Interface Manual preview
Firebox V10
Brand: Watchguard Pages: 181
SMC Networks 2504W - FICHE TECHNIQUE Overview preview
2504W - FICHE TECHNIQUE
Brand: SMC Networks Pages: 2
Fortinet FortiGate 310B-LENC Quick Start Manual preview
FortiGate 310B-LENC
Brand: Fortinet Pages: 2
IBASE Technology FWA8506 User Manual preview
FWA8506
Brand: IBASE Technology Pages: 69
8e6 Technologies appliance watchdog User Manual preview
appliance watchdog
Brand: 8e6 Technologies Pages: 50
Global Technology Associates GB-800 Brochure preview
GB-800
Brand: Global Technology Associates Pages: 2

Brands by name

Popular brands

Load more brands