Chapter 2 Initial Setup Wizard
ZyWALL ATP Series User’s Guide
53
Figure 26
Internet Access: PPTP Encapsulation
2.1.5 Internet Access: L2TP
2.1.5.1 ISP Parameters
•
Authentication Type
- Select an authentication protocol for outgoing connection requests. Options
are:
•
Chap/PAP
- Your Zyxel Device accepts either CHAP or PAP when requested by the remote node.
•
Chap
- Your Zyxel Device accepts CHAP only.
•
PAP
- Your Zyxel Device accepts PAP only.
•
MSCHAP
- Your Zyxel Device accepts MSCHAP only.
•
MSCHAP-V2
- Your Zyxel Device accepts MSCHAP-V2 only.
• Type the
User Name
given to you by your ISP. You can use alphanumeric and -_@$./ characters, and
it can be up to 31 characters long.
• Type the
Password
associated with the user name. Use up to 64 ASCII characters except the [] and ?.
This field can be blank.
• Select
Nailed-Up
if you do not want the connection to time out. Otherwise, type the
Idle Timeout
in
seconds that elapses before the router automatically disconnects from the PPPoE server.
2.1.5.2 L2TP Configuration
•
Base Interface
: This identifies the Ethernet interface you configure to connect with a modem or router.
• Type a
Base IP Address
(static) assigned to you by your ISP.
