Chapter 34 Object
ZyWALL ATP Series User’s Guide
594
Figure 384
Web Configurator for Non-Admin Users
The following table describes the labels in this screen.
34.2.5 User/Group MAC Address Summary Screen
This screen shows the MAC addresses of wireless clients, which can be authenticated by their
MAC addresses using the local user database.
Click
Configuration > Object > User/Group > MAC
Address
to open this screen.
Note: You need to configure an SSID security profile’s MAC authentication settings to have
the AP use the Zyxel Device’s local database to authenticate wireless clients by their
MAC addresses.
Table 241 Web Configurator for Non-Admin Users
LABEL
DESCRIPTION
User-defined
lease time (max
... minutes)
Access users can specify a lease time shorter than or equal to the one that you specified. The
default value is the lease time that you specified.
Renew
Access users can click this button to reset the lease time, the amount of time remaining before
the Zyxel Device automatically logs them out. The Zyxel Device sets this amount of time
according to the:
•
User-defined lease time
field in this screen
•
Lease time
field in the
User Add/Edit
screen (see
•
Lease time
field in the
Setting
).
Updating lease
time
automatically
This box appears if you checked the
Allow renewing lease time automatically
box in the
Setting
screen. (See
.) Access users can select this check box to
reset the lease time automatically 30 seconds before it expires. Otherwise, access users have
to click the
Renew
button to reset the lease time.
Remaining time
before lease
timeout
This field displays the amount of lease time that remains, though the user might be able to reset
it.
Remaining time
before auth.
timeout
This field displays the amount of time that remains before the Zyxel Device automatically logs
the access user out, regardless of the lease time.