Chapter 34 Object
ZyWALL ATP Series User’s Guide
619
34.5.2 Add/Edit ZyMesh Profile
This screen allows you to create a new ZyMesh profile or edit an existing one. To access this screen, click
the
Add
button or select and existing profile and click the
Edit
button.
Figure 401
Configuration > Object > ZyMesh Profile > Add/Edit ZyMesh Profile
The following table describes the labels in this screen.
34.6 Address/Geo IP Overview
Address objects can represent a single IP address or a range of IP addresses. Address groups are
composed of address objects and other address groups.
• The
Address
screen (
) provides a summary of all addresses in the Zyxel
Device. Use the
Address Add/Edit
screen to create a new address or edit an existing one.
• Use the
Address Group
summary screen (
) and the
Address Group Add/
Edit
screen, to maintain address groups in the Zyxel Device.
• Use the
Geo IP
screen (
) to update the database of country-to-IP address
mappings and to manually configure country-to-IP address mappings.
Profile Name
This field indicates the name assigned to the profile.
ZyMesh SSID
This field shows the SSID specified in this ZyMesh profile.
Table 255 Configuration > Object > ZyMesh Profile (continued)
LABEL
DESCRIPTION
Table 256 Configuration > Object > ZyMesh Profile > Add/Edit ZyMesh Profile
LABEL
DESCRIPTION
Profile Name
Enter up to 31 alphanumeric characters for the profile name.
ZyMesh SSID
Enter the SSID with which you want the managed AP to connect to a root AP or repeater to
build a ZyMesh link.
Note: The ZyMesh SSID is hidden in the outgoing beacon frame so a wireless
device cannot obtain the SSID through scanning using a site survey tool.
Pre-Shared Key
Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
The key is used to encrypt the wireless traffic between the APs.
OK
Click
OK
to
save your changes back to the Zyxel Device.
Cancel
Click
Cancel
to exit this screen without saving your changes.
