Chapter 34 Object
ZyWALL ATP Series User’s Guide
632
34.7.3.1 The Service Group Add/Edit Screen
The
Service Group Add/Edit
screen allows you to create a new service group or edit an existing one. To
access this screen, go to the
Service Group
screen (see
), and click either the
Add
icon or an
Edit
icon.
Figure 412
Configuration > Object > Service > Service Group > Edit
The following table describes the labels in this screen.
34.8 Schedule Overview
Use schedules to set up one-time and recurring schedules for policy routes, security policies, application
patrol, and content filtering. The Zyxel Device supports one-time and recurring schedules. One-time
schedules are effective only once, while recurring schedules usually repeat. Both types of schedules are
based on the current date and time in the Zyxel Device.
Note: Schedules are based on the Zyxel Device’s current date and time.
Table 268 Configuration > Object > Service > Service Group > Edit
LABEL
DESCRIPTION
Name
Enter the name of the service group. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a number. This value is case-
sensitive.
Description
Enter a description of the service group, if any. You can use up to 60 printable ASCII characters.
Configuration
The
Member
list displays the names of the service and service group objects that have been
added to the service group. The order of members is not important.
Select items from the
Available
list that you want to be members and move them to the
Member
list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key to
select multiple entries and use the arrow button to move them.
Move any members you do not want included to the
Available
list.
OK
Click
OK
to
save your changes back to the Zyxel Device.
Cancel
Click
Cancel
to exit this screen without saving your changes.
