Chapter 36 Cloud CNM
ZyWALL ATP Series User’s Guide
684
Figure 451
Configuration > Cloud CNM > SecuManager
The following table describes the labels in this screen.
Table 297 Configuration > Cloud CNM > SecuManager
LABEL
DESCRIPTION
Show Advanced
Settings / Hide
Advanced Settings
Click this button to display a greater or lesser number of configuration fields.
Enable
Select this to allow management of the Zyxel Device by Cloud CNM SecuManager.
Auto
Select this if your Cloud CNM SecuManager server can access myZyxel to automatically
get the VM server URL from myZyxel. You also need
CNM ID
from the Cloud CNM
SecuManager license.
CNM URL
myZyxel associates the
CNM ID
with the
CNM URL
which identifies the server on which
Cloud CNM SecuManager is installed. Therefore you don’t need to enter the CNM URL
when you select
Auto
.
Custom
Select this if your Cloud CNM SecuManager server cannot access myZyxel.
CNM URL
Select this if your VM server or Zyxel Device are in a private network, or if the VM server is
behind a NAT router. You then need to manually enter the VM server URL into the Zyxel
Device. Enter the IPv4 IP address of the Cloud CNM SecuManager server followed by the
port number (default 7547 for HTTPS or 7549 for HTPP) followed by the
CNM ID
from the
license in
CNM URL
. For example, if you installed Cloud CNM SecuManager on a server
with IP address 1.1.1.1 and
CNM ID
V6ABQNTPYGD, then type
1.1.1.1:7547/
V6ABQNTPYG
or
1.1.1.1:7549/V6ABQNTPYG
as the
CNM URL
.
Transfer Protocol
Choose the CNM URL protocol:
HTTP
or
HTTPS
. If you enter 1.1.1.1:7547 as the
CNM URL
,
you must choose
HTTPS
as the
Transfer Protocol
, and then the whole CNM URL is https://
1.1.1.1:7547. If you enter 1.1.1.1:7549 as the
CNM URL
, you must choose
HTTP
as the
Transfer Protocol
, and then the whole CNM URL is http://1.1.1.1:7549.
Periodic Inform
Enable this to have the Zyxel Device inform the Cloud CNM SecuManager server of its
presence at regular intervals.