ZyXEL Communications ATP200 User Manual Download

Page: 704 / 852

Chapter 37 System

ZyWALL ATP Series User’s Guide

704

The following table describes the labels in this screen.

37.6.12 Security Option Control

Configure the

Security Option Control

section in the

Configuration > System > DNS

screen (click

Show

Advanced Settings

to display it) if you suspect the Zyxel Device is being used by hackers in a DNS

amplification attack.

One possible strategy would be to deny

Query Recursion

and

Additional Info from Cache

in the default

policy and allow

Query Recursion

and

Additional Info from Cache

only from trusted DNS servers

identified by address objects and added as members in the customized policy.

37.6.13 Editing a Security Option Control

Click a control policy and then click

Edit

to change

allow

deny

actions for

Query Recursion

and

Additional Info from Cache

Figure 465

Configuration > System > DNS > Security Option Control Edit (Customize)

Table 308 Configuration > System > DNS > MX Record Add

LABEL

DESCRIPTION

Domain Name

Enter the domain name where the mail is destined for.

IP Address/FQDN

Enter the IP address or Fully-Qualified Domain Name (FQDN) of a mail server that handles the
mail for the domain specified in the field above.

Click

to save your customized settings and exit this screen.

Cancel

Click

Cancel

to exit this screen without saving

Summary of Contents for ATP200





















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ATP200

Reviews:

Related manuals for ATP200

Brands by name

Popular brands

ZyXEL Communications ATP200, User Manual

Search results

Summary of Contents for ATP200

Reviews:

Related manuals for ATP200

Brands by name

Popular brands