Chapter 4 Quick Setup Wizards
ZyWALL ATP Series User’s Guide
83
IKE (Internet Key Exchange) Version: IKEv1 and IKEv2
IKE (Internet Key Exchange) is a protocol used in security associations to send data securely. IKE uses
certificates or pre-shared keys for authentication and a Diffie–Hellman key exchange to set up a shared
session secret from which encryption keys are derived.
IKEv2 supports Extended Authentication Protocol (EAP) authentication, and IKEv1 supports X-Auth. EAP is
important when connecting to existing enterprise authentication systems.
Scenario
Rule Name
: Type the name used to identify this VPN connection (and VPN gateway). You may use 1-31
alphanumeric characters, underscores (
_
), or dashes (-), but the first character cannot be a number.
This value is case-sensitive.
Select the scenario that best describes your intended VPN connection. The figure on the left of the
screen changes to match the scenario you select.
•
Site-to-site
- The remote IPSec device has a static IP address or a domain name. This Zyxel Device can
initiate the VPN tunnel.
•
Site-to-site with Dynamic Peer
- The remote IPSec device has a dynamic IP address. Only the remote
IPSec device can initiate the VPN tunnel.
•
Remote Access (Server Role)
- Allow incoming connections from IPSec VPN clients. The clients have
dynamic IP addresses and are also known as dial-in users. Only the clients can initiate the VPN tunnel.
•
Remote Access (Client Role)
- Connect to an IPSec server. This Zyxel Device is the client (dial-in user)
and can initiate the VPN tunnel.
4.3.8 VPN Advanced Wizard - Phase 1 Settings
There are two phases to every IKE (Internet Key Exchange) negotiation – phase 1 (Authentication) and
phase 2 (Key Exchange). A phase 1 exchange establishes an IKE SA (Security Association).
