Chapter 1 Introduction
ZyWALL ATP Series User’s Guide
30
• Enable JavaScripts, Java permissions, and cookies
The recommended screen resolution is 1024 x 768 pixels.
Note: Screenshots and graphics in this book may differ slightly from your product due to
differences in product features or web configurator brand style. Most screen shots in this
guide come from the USG110 and USG60W.
1.4.1 Web Configurator Access
1
Make sure your Zyxel Device hardware is properly connected. See the Quick Start Guide.
2
In your browser go to
http://192.168.1.1
. By default, the Zyxel Device automatically routes this request to
its HTTPS server, and it is recommended to keep this setting. The
Login
screen appears.
3
Type the user name (default: “admin”) and password (default: “1234”).
4
Click
Login
. After you log in for the first time using the default user name and password, you must
change the default admin password in the
Update Admin Info
screen. Enter a new password of from 1
to 64 characters.
In
Configuration > Object > User/Group > Setting
, you can enable
Password Complexity
to require a
new password to consist of at least 8 characters and at most 64, where at least 1 character must be a
number, at least 1 a lower case letter, at least 1 an upper case letter and at least 1 a special character
from the keyboard, such as !@#$%^&*()_+. You can also require periodic changing of the password in
that screen by configuring
Password must changed every (days)
.
Make a note of your new password, enter it in the following screen, then click
Apply
.
