Chapter 13 Redirect Service
ZyWALL ATP Series User’s Guide
345
The following table describes the labels in this screen.
Table 140 Network > Redirect Service > Edit
LABEL
DESCRIPTION
Enable
Use this option to turn the Redirect Service rule on or off.
Service
Select the service to be redirected:
HTTP Redirect
or
SMTP redirect.
Name
Enter a name to identify this rule. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a number. This value
is case-sensitive.
Criteria
User
Select the user account or user group name to which this rule is applied.
Interface
Select the interface on which the request must be received for the Zyxel Device to
forward it to the specified server.
Source Address
Select the name of the source IP address object from which the traffic should be
sent. Select
any
for the rule to be effective for every source.
Redirect Settings
Server
Enter the IP address of the HTTP proxy or SMTP server.
Port
Enter the port number that the HTTP proxy or SMTP server uses.
OK
Click
OK
to save your changes back to the Zyxel Device.
Cancel
Click
Cancel
to exit this screen without saving.
