Chapter 2 Initial Setup Wizard
ZyWALL ATP Series User’s Guide
62
2.1.13 Wireless Settings: SSID & Security
Configure SSID and wireless security in this screen.
SSID Setting
•
SSID
- Enter a descriptive name of up to 32 printable characters for the wireless LAN.
•
Security Mode
- Select
Pre-Shared Key
to add security on this wireless network. Otherwise, select
None
to allow any wireless client to associate this network without authentication.
•
Pre-Shared Key
- Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters
(including spaces and symbols) or 64 hexadecimal characters.
•
Hidden SSID
- Select this option if you want to hide the SSID in the outgoing beacon frame. A wireless
client then cannot obtain the SSID through scanning using a site survey tool.
•
Enable Intra-BSS Traffic Blocking
- Select this option if you want to prevent crossover traffic from within
the same SSID. Wireless clients can still access the wired network but cannot communicate with each
other.
For Built-in Wireless AP Only
Bridged to
: Zyxel Devices with W in the model name have a built-in AP. Select an interface to bridge with
the built-in AP wireless network. Devices connected to this interface will then be in the same broadcast
domain as devices in the AP wireless network.
Figure 38
Wireless Settings: SSID & Security
2.1.14 Remote Management
Select this to allow access to the Zyxel Device using HTTP or HTTPS from the Internet.
