Chapter 37 System
ZyWALL ATP Series User’s Guide
711
Figure 469
Configuration > System > Service Control Rule > Edit
The following table describes the labels in this screen.
37.7.6 Customizing the WWW Login Page
Click
Configuration > System > WWW > Login Page
to open the
Login Page
screen. Use this screen to
customize the Web Configurator login screen. You can also customize the page that displays after an
access user logs into the Web Configurator to access network services like the Internet.
Table 312 Configuration > System > Service Control Rule > Edit
LABEL
DESCRIPTION
Create new
Object
Use this to configure any new settings objects that you need to use in this screen.
Address Object
Select
ALL
to allow or deny any computer to communicate with the Zyxel Device using this
service.
Select a predefined address object to just allow or deny the computer with the IP address that
you specified to access the Zyxel Device using this service.
Zone
Select
ALL
to allow or prevent any Zyxel Device zones from being accessed using this service.
Select a predefined Zyxel Device zone on which a incoming service is allowed or denied.
Action
Select
Accept
to allow the user to access the Zyxel Device from the specified computers.
Select
Deny
to block the user’s access to the Zyxel Device from the specified computers.
OK
Click
OK
to save your customized settings and exit this screen.
Cancel
Click
Cancel
to exit this screen without saving
