Chapter 11 Network Address Translation (NAT)
EX5501-B0 / AX7501-B0 / PX7501-B0 User’s Guide
175
Figure 101
Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 59 Port Forwarding: Add/Edit
LABEL
DESCRIPTION
Active
Click this switch to enable or disable the rule. When the switch goes to the right
, the
function is enabled. Otherwise, it is not.
Service Name
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
WAN Interface
Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.
Note: This field is not available if you select
Obtain WAN IP Automatically
.
Start Port
Enter the original destination port for the packets.
To forward only one port, enter the port number again in the
End Port
field.
To forward a series of ports, enter the start port number here and the end port number in the
End
Port
field.
End Port
Enter the last port of the original destination port range.
To forward only one port, enter the port number in the
Start
Port
field above and then enter it
again in this field.
To forward a series of ports, enter the last port number in a series that begins with the port
number in the
Start Port
field above.
