Chapter 18 MAC Filter
EX5501-B0 / AX7501-B0 / PX7501-B0 User’s Guide
219
Figure 135
Enabling individual MAC Filters
The following table describes the labels in this screen.
Table 86 Security > MAC Filter
LABEL
DESCRIPTION
MAC Address Filter
Select
Enable
to activate the MAC filter function.
MAC Restrict Mode
Select
Allow
to only permit the listed MAC addresses access to the Zyxel Device. Select
Deny
to permit anyone access to the Zyxel Device except the listed MAC addresses.
Add New Rule
Click this button to create a new entry.
Set
This is the index number of the MAC address.
Active
Select
Active
to enable the MAC filter rule. The rule will not be applied if
Allow
is not
selected.
Host Name
Enter the host name of the wireless or LAN clients that are allowed access to the Zyxel
Device.
MAC Address
Enter the MAC addresses of the wireless or LAN clients that are allowed access to the Zyxel
Device in these address fields. Enter the MAC addresses in a valid MAC address format, that
is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Delete
Click the
Delete
icon to delete an existing rule.
Cancel
Click
Cancel
to restore your previously saved settings.
Apply
Click
Apply
to save your changes.