manualshive.com logo in svg

ZyXEL Communications AX7501-B0, User Manual

Introducing the ZyXEL Communications AX7501-B0, a cutting-edge device designed to revolutionize your networking experience. Unlock the full potential of this incredible product by easily accessing its comprehensive User Manual. Get your hands on the free manual now, exclusively available for download at 88.208.23.73:8080.

Share
Download
background image

 Chapter 22 VoIP

EX5501-B0 / AX7501-B0 / PX7501-B0 User’s Guide

245

Each field is described in the following table.

Table 102   VoIP > SIP > SIP Service Provider > Add New Provider/Edit

LABEL

DESCRIPTION

SIP Service Provider Selection

Service Provider 
Selection

This field displays 

ADD_NEW

 if you are creating a new SIP service provider profile or the SIP service 

provider name you are modifying.

General

SIP Service 
Provider

Select 

Enable SIP Service Provider

 to enable the SIP service provider.

SIP Service 
Provider Name

Enter the name of your SIP service provider.

SIP Local Port

Enter the Zyxel Device’s listening port number, if your VoIP service provider gave you one. 
Otherwise, keep the default value.

SIP Proxy Server 
Address

Enter the IP address or domain name of the SIP server provided by your VoIP service provider. 
You can use up to 95 printable ASCII characters. It does not matter whether the SIP server is a 
proxy, redirect or register server.

SIP Proxy Server 
Port

Enter the SIP server’s listening port number, if your VoIP service provider gave you one. 
Otherwise, keep the default value.

SIP REGISTRAR 
Server Address

Enter the IP address or domain name of the SIP register server, if your VoIP service provider gave 
you one. Otherwise, enter the same address you entered in the 

SIP Server Address

 field. You can 

use up to 95 printable ASCII characters.

SIP REGISTRAR 
Server Port

Enter the SIP register server’s listening port number, if your VoIP service provider gave you one. 
Otherwise, enter the same port number you entered in the 

SIP Server Port

 field.

SIP Service 
Domain

Enter the SIP service domain name. In the full SIP URI, this is the part after the @ symbol. You can 
use up to 127 printable ASCII Extended set characters.

RFC Support

PRACK (RFC 
3262, Require: 
100rel)

PRACK (RFC 3262) defines a mechanism to provide reliable transmission of SIP provisional 
response messages, which convey information on the processing progress of the request. This 
uses the option tag 100rel and the Provisional Response ACKnowledgement (PRACK) method.

Select this to have the peer device require the option tag 100rel to send provisional responses 
reliably.

VoIP IOP Flags

Select the VoIP inter-operability settings you want to activate.

Replace dial 
digit ‘#’ to ‘%23’ 
in SIP messages

Replace a dial digit “#” with “%23” in the INVITE messages.

Remove the 
‘Route’ header 
in SIP messages

Remove the ‘Route’ header in SIP packets.

Bound Interface Name

Bound Interface 
Name

If you select 

Any_WAN

, the Zyxel Device automatically activates the VoIP service when any LAN 

or WAN connection is up.

If you select 

Multi_WAN

, you also need to select two or more pre-configured WAN interfaces. 

The VoIP service is activated only when one of the selected WAN connections is up.

Outbound Proxy

Outbound Proxy 
Address

Enter the IP address or domain name of the SIP outbound proxy server if your VoIP service 
provider has a SIP outbound server to handle voice calls. This allows the Zyxel Device to work 
with any type of NAT router and eliminates the need for STUN or a SIP ALG. Turn off any SIP ALG 
on a NAT router in front of the Zyxel Device to keep it from re-translating the IP address (since this 
is already handled by the outbound proxy server).

Outbound Proxy 
Port

Enter the SIP outbound proxy server’s listening port, if your VoIP service provider gave you one. 
Otherwise, keep the default value.

Summary of Contents for AX7501-B0










































































































































































































































































































































































Reviews:

No comments

Related manuals for AX7501-B0

Secure Computing NETWORK INTERFACE CARDS Manual preview
NETWORK INTERFACE CARDS
Brand: Secure Computing Pages: 17
C2G Trulink Media gateway W02 Installation Manual preview
Trulink Media gateway W02
Brand: C2G Pages: 23
King Pigeon D225 User Manual preview
D225
Brand: King Pigeon Pages: 58
Technicolor - Thomson DCW615 User Manual preview
DCW615
Brand: Technicolor - Thomson Pages: 52
SST Automation GT200-MT-DN User Manual preview
GT200-MT-DN
Brand: SST Automation Pages: 44
Dr. Neuhaus TAINY IQ Security Instructions preview
TAINY IQ
Brand: Dr. Neuhaus Pages: 2
VBOX XTI 3442 Quick Installation Manual preview
XTI 3442
Brand: VBOX Pages: 40
ZyXEL Communications VMG3625-T50B Quick Start Manual preview
VMG3625-T50B
Brand: ZyXEL Communications Pages: 2
RAB Lightcloud LCGATEWAY Manual preview
Lightcloud LCGATEWAY
Brand: RAB Pages: 67
evertz 78908MG-10GE2 User Manual preview
78908MG-10GE2
Brand: evertz Pages: 52
ViewSonic WPG-360 Specification Sheet preview
WPG-360
Brand: ViewSonic Pages: 1
NexLink IOP-1 Instruction Manual preview
IOP-1
Brand: NexLink Pages: 24
Vlinx MESR424 Instruction Manual preview
MESR424
Brand: Vlinx Pages: 71
Arris SURFboard SBG7400AC2 User Manual preview
SURFboard SBG7400AC2
Brand: Arris Pages: 22
Speed Touch 580 Cli Reference Manual preview
580
Brand: Speed Touch Pages: 676
Watts SentryPlus Alert Installation, Operation And Maintenance Manual preview
SentryPlus Alert
Brand: Watts Pages: 16
Technoton CAN UP 27 Operation Manual preview
CAN UP 27
Brand: Technoton Pages: 69
Kannel 1.3.1 User Manual preview
1.3.1
Brand: Kannel Pages: 116

Brands by name

Popular brands

Load more brands