Chapter 34 SNMP
EX5501-B0 / AX7501-B0 / PX7501-B0 User’s Guide
297
The following table describes the fields in this screen.
Table 133 Maintenance > SNMP
LABEL
DESCRIPTION
SNMP Agent
Enable this switch to let the Zyxel Device act as an SNMP agent, which allows a manager
station to manage and monitor the Zyxel Device through the network, Click on this switch to
enable/disable it. When the switch goes to the right
, the function is enabled.
Get Community
Enter the
Get Community
, which is the password for the incoming Get and GetNext requests
from the management station.
Set Community
Enter the
Set Community
, which is the password for the incoming Set requests from the
management station.
Trap Community
Enter the
Trap Community
, which is the password sent with each trap to the SNMP manager.
The default is public and allows all requests.
System Name
Enter the SNMP system name.
System Location
Enter the SNMP system location.
System Contact
Enter the SNMP system contact.
Trap Destination
Type the IP address of the station to send your SNMP traps to.
Cancel
Click
Cancel
to restore your previously saved settings.
Apply
Click
Apply
to save your changes back to the Zyxel Device.
