Chapter 6 Broadband
EX5501-B0 / AX7501-B0 / PX7501-B0 User’s Guide
89
Ping Default
Gateway
Select this to have the Zyxel Device ping the WAN interface’s default gateway IP address.
Ping the Host
Select this to have the Zyxel Device ping the particular host name or IP address you typed in this
field.
Cellular Connection Settings
Card
description
This field displays the manufacturer and model name of your cellular card if you inserted one in
the Zyxel Device. Otherwise, it displays
N/A
.
Username
Type the user name (of up to 64 ASCII printable characters) given to you by your service
provider.
Password
Type the password (of up to 64 ASCII printable characters) associated with the user name
above.
PIN
A PIN (Personal Identification Number) code is a key to a cellular card. Without the PIN code,
you cannot use the cellular card.
If your ISP enabled PIN code authentication, enter the 4-digit PIN code (0000 for example)
provided by your ISP. If you enter the PIN code incorrectly, the cellular card may be blocked by
your ISP and you cannot use the account to access the Internet.
If your ISP disabled PIN code authentication, leave this field blank.
Dial string
Enter the phone number (dial string) used to dial up a connection to your service provider’s base
station. Your ISP should provide the phone number.
For example, *99# is the dial string to establish a GPRS or cellular connection in Taiwan.
APN
Enter the APN (Access Point Name) provided by your service provider. Connections with
different APNs may provide different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charge method.
You can enter up to 32 ASCII printable characters. Spaces are allowed.
Connection
Select
Nailed UP
if you do not want the connection to time out.
Select
on Demand
if you do not want the connection up all the time and specify an idle time-
out in the
Max Idle Timeout
field.
Max Idle
Timeout
This value specifies the time in minutes that elapses before the Zyxel Device automatically
disconnects from the ISP.
Obtain an IP
Address
Automatically
Select this option if your ISP did not assign you a fixed IP address.
Use the
following static
IP address
Select this option if the ISP assigned a fixed IP address.
IP Address
Enter your WAN IP address in this field if you selected
Use the following static IP address
.
Subnet Mask
Enter the subnet mask of the IP address.
Obtain DNS info
dynamically
Select this to have the Zyxel Device get the DNS server addresses from the ISP automatically.
Use the
following static
DNS IP address
Select this to have the Zyxel Device use the DNS server addresses you configure manually.
Primary DNS
server
Enter the first DNS server address assigned by the ISP.
Secondary
DNS server
Enter the second DNS server address assigned by the ISP.
Enable E-mail
Notification
Select this to enable the e-mail notification function. The Zyxel Device will e-mail you a
notification when the cellular connection is up.
Table 19 Network Setting
>
Broadband > Cellular Backup (continued)
LABEL
DESCRIPTION
