Chapter 9 Routing
EX5501-B0 / AX7501-B0 / PX7501-B0 User’s Guide
147
9.3 DNS Route
Use this screen to view and configure DNS routes on the Zyxel Device. A DNS route entry defines a policy
for the Zyxel Device to forward a particular DNS query to a specific WAN interface.
Note: A maximum of 20 DNS routes can be added.
Click
Network Setting > Routing > DNS Route
to open the
following
screen.
Figure 85
Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
9.3.1 Add DNS Route
You can manually add the Zyxel Device’s DNS route entry. Click
Add New DNS Route
in the
Network
Setting > Routing > DNS Route
screen. The screen shown next appears.
Table 42 Network Setting > Routing > DNS Route
LABEL
DESCRIPTION
Add New DNS
Route
Click this to add a new DNS route.
#
This is the index number of a DNS route.
Status
This field displays whether the DNS route is active or not. A yellow bulb signifies that this DNS route
is active. A gray bulb signifies that this DNS route is not active.
Domain Name
This is the host name or domain name of the DNS route entry.
WAN Interface
This is the WAN connection through which the Zyxel Device forwards DNS requests for this
domain name.
Subnet Mask
This is the subnet mask of the DNS route entry.
Modify
Click the
Edit
icon to modify the DNS route.
Click the
Delete
icon to delete the DNS route.
