Chapter 9 Routing
EMG6726/8726-B10A User’s Guide
129
Figure 76
Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
9.3.1 The DNS Route Add Screen
You can manually add the EMG’s DNS route entry. Click
Add New DNS Route
in the
Network Setting >
Routing > DNS Route
screen. The screen shown next appears.
Figure 77
DNS Route Add
Table 34 Network Setting > Routing > DNS Route
LABEL
DESCRIPTION
Add New DNS
Route
Click this to add a new DNS route.
#
This is the index number of a DNS route.
Status
This field displays whether the DNS route is active or not. A yellow bulb signifies that this DNS route
is active. A gray bulb signifies that this DNS route is not active.
Domain Name
This is the host name or domain name of the DNS route entry.
WAN Interface
This is the WAN connection through which the EMG forwards DNS requests for this domain name.
Subnet Mask
This is the subnet mask of the DNS route entry.
Modify
Click the
Edit
icon to modify the DNS route.
Click the
Delete
icon to delete the DNS route.
