Chapter 9 Routing
EMG6726/8726-B10A User’s Guide
131
9.4.1 Add/Edit Policy Route
Click
Add New Policy Route
in the
Policy Route
screen or click the
Edit
icon next to a policy. Use this
screen to configure the required information for a policy route.
Figure 79
Policy Route: Add/Edit
The following table describes the labels in this screen.
Protocol
This is the transport layer protocol.
Source Port
This is the source port number.
Source MAC
This is the source MAC address.
Source
Interface
This is the interface from which the matched traffic is sent.
WAN Interface
This is the WAN interface through which the traffic is routed.
Modify
Click the
Edit
icon to edit this policy.
Click the
Delete
icon to remove a policy from the EMG. A window displays asking you to confirm
that you want to delete the policy.
Table 36 Network Setting > Routing >Policy Route (continued)
LABEL
DESCRIPTION
Table 37 Policy Route: Add/Edit (Sheet 1 of 2)
LABEL
DESCRIPTION
Active
Select to enable or disable this policy route.
Route Name
Enter a descriptive name of up to 8 printable English keyboard characters, not including spaces.
Source IP
Address
Enter the source IP address.
Source Subnet
Mask
Enter the source subnet mask address.
Protocol
Select the transport layer protocol (
TCP
or
UDP
).
Source Port
Enter the source port number.
Source MAC
Enter the source MAC address.
