Chapter 15 Interface Grouping
EMG6726/8726-B10A User’s Guide
182
15.2.2 Interface Grouping Criteria
Click the
Add
button in the
Interface Grouping Configuration
screen to open the following screen.
Figure 117
Interface Grouping Criteria
The following table describes the fields in this screen.
Automatically
Add Clients With
the following
DHCP Vendor
IDs
Click
Add
to identify LAN hosts to add to the interface group by criteria such as the type of the
hardware or firmware. See
#
This shows the index number of the rule.
Filter Criteria
This shows the filtering criteria. The LAN interface on which the matched traffic is received will
belong to this group automatically.
WildCard
Support
This shows if wildcard on DHCP option 60 is enabled.
Modify
Click the
Modify
icon to edit this rule from the EMG.
OK
Click
OK
to save your changes back to the EMG.
Cancel
Click
Cancel
to exit this screen without saving.
Table 71 Interface Group Configuration (continued)
LABEL
DESCRIPTION
Table 72 Interface Grouping Criteria
LABEL
DESCRIPTION
Source MAC
Address
Select this option and enter the source MAC address of the packet.
DHCP Option 60 Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic, such
as the type of the hardware or firmware.
Enable
wildcard
Select this option to be able to use wildcards in the Vendor Class Identifier configured for DHCP
option 60.
DHCP Option 61 Select this and enter the device identity of the matched traffic.
DHCP Option
125
Select this and enter vendor specific information of the matched traffic.
