Chapter 4 Tutorials
EMG6726/8726-B10A User’s Guide
38
3
Select the
Active
check box. Enter the
General
and
Account Information
settings as provided above.
Set the
Type
to
Ethernet
.
Choose the
Encapsulation
specified by your service provider. For this example, the service provider
requires a username and password to establish Internet connection. Therefore, select
PPPoE
as the WAN
encapsulation type.
Set the
IPv6/IPv4 Mode
to
IPv4 Only
.
4
Enter the account information provided to you by your service provider.
5
Configure this rule as your default Internet connection by selecting the
Apply as Default Gateway
check
box. Then select DNS as
Static
and enter the DNS server addresses provided to you, such as
192.168.5.2
(DNS server1)/
192.168.5.1
(DNS server2).
6
Leave the rest of the fields to the default settings.
7
Click
Apply
to save your settings.
Encapsulation
PPPoE
IPv6/IPv4 Mode
IPv4 Only
Account Information
PPP User Name
1234@WAN-Ex.com
PPP Password
ABCDEF!
Static IP Address
192.168.1.32
Others
PPP Connection Trigger: Auto Connect
PPPoE Passthrough: Disable
NAT Enable: Enable
IGMP Proxy Enable: Enable
Apply as Default Gateway: Enable
VLAN Active: Disable