Chapter 4 Tutorials
EMG6726/8726-B10A User’s Guide
43
3
You can either press the
WPS
button on the EMG’s panel or click the
Connect
button for the
corresponding 2.4G or 5G wireless band in the
Network Setting > Wireless > WPS
screen.
4
Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks list and tap
WPS Push Button
or the
WPS icon (
).
Note: It doesn’t matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The EMG sends the proper configuration settings to the wireless client. This may take up to two minutes.
The wireless client is then able to communicate with the EMG securely.
The following figure shows you an example of how to set up a wireless network and its security by
pressing a button on both EMG and wireless client (the Android 4.4.2 phone in this example).
