EMG6726/8726-B10A User’s Guide
77
C
H A P T E R
7
Wireless
7.1 Overview
This chapter describes the EMG’s
Network Setting > Wireless
screens. Use these screens to set up your
EMG’s wireless connection.
7.1.1 What You Can Do in this Chapter
This section describes the EMG’s
Wireless
screens. Use these screens to set up your EMG’s wireless
connection.
• Use the
WiFi
screen to enable the Wireless LAN, enter the SSID and select the wireless security mode
).
• Use the
Guest WiFi
screen to set up multiple wireless networks on your EMG (
• Use the
WPS
screen to add another WPS-enabled wireless device (within wireless range of the EMG)
to the EMG’s 2.4G or 5G wireless network(
).
• Use the
Advanced
screen to configure advanced settings for the EMG’s 2.4G and 5G wireless
network (
• Use the
Channel Status
screen to scan the number of devices which are using 2.4G and/or 5G wireless
channels and view the results (
• Use the
MESH
screen to enable or disable wireless roaming between the EMG and an wireless AP
extender device (
7.1.2 What You Need to Know
Wireless Basics
“Wireless” is essentially radio communication. In the same way that walkie-talkie radios send and
receive information over the airwowaves, wireless networking devices exchange information with one
another. A wireless networking device is just like a radio that lets your computer exchange information
with radios attached to other computers. Like walkie-talkies, most wireless networking devices operate
at radio frequency bands that are open to the public and do not require a license to use. However,
wireless networking is different from that of most traditional radio communications in that there a
number of wireless networking standards available with different methods of data encryption.
Finding Out More
See
