Chapter 7 Wireless
EMG6726/8726-B10A User’s Guide
78
7.2 The WiFi Screen
Use this screen to view the wireless network name and password. You can also click the
Edit
icon to
configure the settings.
Click
Network
Setting
>
Wireless
to open the
WiFi
screen.
Figure 28
Network Setting > Wireless > WiFi
Figure 29
Network Setting > Wireless > WiFi (Without Keeping 2.4G and 5G WiFi Network Name The
Same)
The following table describes the general wireless LAN labels in this screen.
7.2.1 The WiFi Edit Screen
Use this screen to view and configure the wireless network name, password and security type. Click the
Edit
icon on the
Network
Setting
>
Wireless
>
WiFi
screen to open the
WiFi Edit
screen.
Table 14 Network Setting > Wireless > WiFi
LABEL
DESCRIPTION
Keep 2.4G and
5G WiFi network
name the same
Select this if you want the EMG use the same wireless network name, password, and security
type for both the 2.4GHz and 5GHz band networks. Clear this to have the screen display the
corresponding information for the 2.4GHz and 5GHz band networks.
2.4GHz is the frequency used by IEEE 802.11b/g/n wireless clients while 5GHz is used by IEEE
802.11a/ac wireless clients.
Note: This setting is configurable only when the MESH function is disabled in the
Network Setting > Wireless > MESH
screen.
WiFi Network
Name
This is the wireless network name.
Password
This is the password of the wireless network.
Action
Click the
Edit
icon to configure the wireless network settings.
