Chapter 22 Voice
EMG6726/8726-B10A User’s Guide
221
22.6 Region
Use this screen to maintain settings that depend on which region of the world the EMG is in. To access
this screen, click
VoIP > Region
.
Figure 146
VoIP > Region
Each field is described in the following table.
22.7 Call Rule
Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. Speed dial provides
shortcuts for dialing frequently-used (VoIP) phone numbers. You also have to create speed-dial entries if
you want to call SIP numbers that contain letters. Once you have configured a speed dial rule, you can
use a shortcut (the speed dial number, #01 for example) on your phone's keypad to call the phone
number.
Immediate Dial
Enable
Select this if you want to use the pound key (#) to tell the EMG to make the phone call
immediately, instead of waiting the number of seconds you selected in the
Dialing Interval
Selection
field of the
VoIP > SIP > SIP Service Provider > Add New Provider/Edit
screen.
If you select this, dial the phone number, and then press the pound key. The EMG makes the
call immediately, instead of waiting. You can still wait, if you want.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Table 97
VoIP > Phone > Phone Device > Edit
LABEL
DESCRIPTION
Table 98 VoIP > Region
LABEL
DESCRIPTION
Region Settings
Select the place in which the EMG is located.
Call Service Mode
Select the mode for supplementary phone services (call hold, call waiting, call transfer and
three-way conference calls) that your VoIP service provider supports.
Europe Type
- use supplementary phone services in European mode
USA Type
- use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact your VoIP service
provider.
Apply
Click this to save your changes and to apply them to the EMG.
Cancel
Click this to set every field in this screen to its last-saved value.