Chapter 4 Tutorials
EMG6726/8726-B10A User’s Guide
42
Thomas can now use the WPS feature to establish a wireless connection between his notebook and the
EMG (see
). He can also use the notebook’s wireless client to search for the
).
4.3.2 Using WPS
This section shows you how to set up a wireless network using WPS. It uses the EMG as the AP and a WPS-
enabled Android 4.4.2 smartphone as the wireless client.
to set up the wireless client settings:
1
Make sure that your EMG is turned on and your Android 4.42 smartphone is within the cover range of the
wireless signal.
2
Make sure WPS is enabled on the EMG. You can check it by logging into the EMG’s Web Configurator
and see if it is enabled in the
Network Setting > Wireless > Advanced
screen. If not, select the
WPS
checkbox for the 2.4G or 5G wireless network and then click
Apply
.
Note: When the MESH function is enabled (see
automatically enables WPS and grays the field out on this
Network Setting > Wireless >
Advanced
screen.