Chapter 6 Broadband
EMG6726/8726-B10A User’s Guide
67
Figure 24
Dual Stack Lite
6.1.3 Before You Begin
You need to know your Internet access settings such as encapsulation and WAN IP address. Get this
information from your ISP.
6.2 The Broadband Screen
Use this screen to change your EMG’s Internet access settings. Click
Network Setting
>
Broadband
from
the menu. The summary table shows you the configured WAN services (connections) on the EMG.
Figure 25
Network Setting > Broadband
The following table describes the labels in this screen.
Table 11 Network Setting > Broadband
LABEL
DESCRIPTION
Add New WAN
Interface
Click this button to create a new connection.
#
This is the index number of the entry.
Name
This is the service name of the connection.
Type
This shows it is an Ethernet connection.
Mode
This shows whether the connection is in routing or bridge mode.
Encapsulation
This is the method of encapsulation used by this connection.
802.1p
This indicates the 802.1p priority level assigned to traffic sent through this connection. This
displays
N/A
when there is no priority level assigned.
