Chapter 7 Wireless
EMG6726/8726-B10A User’s Guide
80
7.3 The Guest WiFi Screen
This screen allows you to enable and configure multiple wireless networks for guests on the EMG.
You can view/configure one guest WiFi network and three extra WiFi networks on this screen. The extra
WiFi networks include two extra 2.4GHz WiFi networks and one extra 5GHz WiFi network. The only
difference between guest WiFi and extra WiFi is that you can configure the number of hours to keep the
guest WiFi network on before the EMG turns it off.
Click
Network Setting
>
Wireless
>
Guest WiFi
. The following screen displays.
Figure 32
Network Setting > Wireless > Guest WiFi
The following table describes the labels in this screen.
WiFi Security
Type
Select
WPA2-PSK
to add security on this wireless network. The WPA2-PSK security mode is a
newer, more robust version of the WPA encryption standard. It offers wireless clients a better and
secure connection. The wireless clients which want to associate to this network must have same
wireless security settings as the EMG.
Or you can select
No Security
to allow any client to associate this network and the guest wireless
network of the same wireless band (see Section
) without any data encryption or
authentication.
Save
Click
Save
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Table 15 Network Setting > Wireless > WiFi > Edit (continued)
LABEL
DESCRIPTION
Table 16 Network Setting > Wireless > Guest WiFi
LABEL
DESCRIPTION
Guest WiFi
Enable Guest
WiFi
Select this to enable the guest wireless network.
WiFi Network
Name
This field displays the guest WiFi network name.
Password
This field displays the password used to connect to this guest wireless network.
Action
Click the
Edit
icon to configure the WiFi network profile.
Extra WiFi
Band
This field indicates whether this extra WiFi network uses 2.4GHz or 5GHz band.
WiFi Network
Name
This field displays the extra WiFi network name.
