background image

 Chapter 1 Web Configurator

ENC User’s Guide

43

The following figure shows you an example of moving a device from one network to another. You 
may need to modify the device name and IP address by double-clicking the device.

Figure 27   

Moving a Device 

1.3.5.6  Copy/Paste Device

Copying a device and pasting it to another network in the OTV panel is similar to cutting and 
pasting a device. The difference is Copy Device does not remove the device from the original 
network. You may want to copy a device if you want to manually add a device and the device’s 
configuration is similar to the one from which you want to copy. 

1.3.6  Common Icons

This table describes the icons the ENC commonly uses.

Table 15   

Common Icons

ICON

DESCRIPTION

An Info event occurred on the device and it has not been acknowledged. Click this to view 
the event details.

An event is a log entry generated when an associated alarm occurs on a device. Use an 
event icon as a reminder that notifies you a to-do list. To clear the icon in the OTV, you 
have to acknowledge all the events on the device (see 

Section 2.1 on page 47

). 

Major event occurred on the device and it has not been acknowledged. Click this to 
view the event details.

Minor event occurred on the device and it has not been acknowledged. Click this to 
view the event details.

The ENC is collecting the device’s performance information. Click this to view raw data and 
reports.

Online. The device or all devices in the network are online and accessible from the ENC.

Partial Online. Some devices in the network are online but some are either off or not 
accessible from the ENC.

Un-Monitored. The device or network is temporarily not managed by the ENC.

Offline. The device or network is not accessible from the ENC.

Edit AP Profile. The device has not yet been applied any wireless AP profile. Click this 
icon to configure it.

Summary of Contents for ENTERPRISE NETWORK CENTER















































































































































































































































































































Reviews: