ZyXEL Communications ENTERPRISE NETWORK CENTER Manual Download | Manualshive

Page: 117 / 302

background image

Chapter 4 Configuration

ENC User’s Guide

117

The following table describes the labels in this screen.

4.4.6 Creating or Editing an Update Schedule List

Click Configuration > Update/Backup > Update Schedule List > Add (or select a schedule
and click Edit) and use the following steps to create or edit a waiting configuration update
schedule. For an existing update schedule you can only edit the update time; skip to the last step
for details.

1

Select the model for which you want to update the configuration file and click Next.

Table 37

Configuration > Update/Backup > Update Schedule List

LABEL

DESCRIPTION

Device Name

To narrow down the list of displayed results, specify the name or partial
name of a managed device.

Add

Click this to create a new schedule for having the ENC upload configuration
files to managed devices.

Edit

Select an entry that has a Status of Waiting and click this to edit the
entry.

Remove

Select an entry that is not running and click this to delete it.

check box

Select the check box of an entry and click Edit or Remove to take the
action for the entry respectively. Select or clear the check box at the table
heading line to select or clear all check boxes in this column.

Status

This shows whether the scheduled configuration upload is Running, waiting
to start (Waiting), has failed (Fail), has all completed (Success) or has
partial completed (Partial Success).

Note: Some devices may need a manual system restart to complete the

whole configuration restore process. Check the User’s Guide of your
device for the related information.

File Name

Enter up to 20 characters to specify a name for the configuration file. You
can use letters, numbers, underscores, and dashes.

Device Model

This is the model of the selected managed device.

Total Device

This is how many devices this schedule is to have the ENC upload
configuration files to.

Update Time

This is the date and time that the configuration file update was (or is
scheduled to be) performed.

Admin

This is the name of the administrator who created the configuration file
update schedule.

«
...
115
116
117
118
119
...
»

Summary of Contents for ENTERPRISE NETWORK CENTER















































































































































































































































































































Reviews:

No comments

Related manuals for ENTERPRISE NETWORK CENTER

Brand: Watchguard Pages: 19

Firebox SOHO 6.1

Brand: Watchguard Pages: 140

Brand: Watchguard Pages: 22

Brand: Nexcom Pages: 76

Brand: Palo Alto Pages: 44

Brand: Bandura Cyber Pages: 93

Brand: ZyXEL Communications Pages: 2

Unified Security Gateway ZyWALL 300

Brand: ZyXEL Communications Pages: 6

Brand: Stormshield Pages: 59

Brand: GROM Audio Pages: 153

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands