Hardware Specifications
IES-5000M
• 10-slot rack mountable enclosure,
19” or 23” chassis
• 8 slots for line termination cards
• 2 slots for management and switch cards
• 2 DC power input module and filter
• One FAN and dust filter module
IES-5005M
• 5-slot rack mountable enclosure,
19” or 23” chassis
• 4 slots for line termination cards
• 1 slots for management and switch cards
• 2 DC power input module and filter
• One FAN and dust filter module
ALC1248G-51/ALC1272G-51
• Hot swappable 48-port/72-port ADSL2/ADSL2+
Annex A line card
• Maximum transmission rate up to 25 Mbps/
2.4 Mbps for ADSL2+
• One mini-RJ11 console port
• One gigabit backplane
• Support G.992.3 and G.992.5 spectral mask
• Support EOC and overhead channel access
defined in G.992.3 and Rec.G.997.1
• Support the latency path function specified in
G.992.3 and G.992.5
• Support Annex L and Annex M specified in
G.992.3 and G.992.5
• Support loop diagnostic function specified in
G.992.3 and G.992.5
• Support the power management capability
specified in G.992.3 and G.992.5
• Support the capability of the seamless rate
Adaptation (SRA) on-line configuration specified
in G.992.3 and G.992.5
• Support ADSL2+ 2-port bonding (G.998.1)
ALC1248G-53
• Hot swappable 48-port ADSL2/ADSL2+ Annex B
line card
• Support Annex M and Annex L specified in
G.992.3 and G.992.5
• Maximum transmission rate up to 25 Mbps/
2.4 Mbps for ADSL2+
• One mini-RJ11 console port
• One gigabit backplane
SLC1348G-22
• Hot swappable 48-port SHDSL/SHDSL.bis
line card
• Support ETSI TS 101 524 V 1.2.1, ITU-T G.991.2,
ITU-T G.991.2.bis
• ATM-based multi-pair bonding (G.998.1) up to
8 ports
• Symmetric transmission rate of 5.69 Mbps/port
• One mini-RJ11 console port
• One gigabit backplane
• Support IEEE EFM
VLC1324G-51/VLC1324G-53/
VLC1348G-51/VLC1348G-53
• Hot swappable 24-port/48-port VDSL2 line card
over POTS and over ISDN
• Support G.993.2, G.994.1, G.997.1
• Maximum transmission rate up to 100 Mbps/
50 Mbps
• One mini-RJ11 console port
• Two gigabit backplane
• Support VDSL2 profiles 8a, 8b, 8c, 8d, 12a, 12b
and 17a
• Support frequency allocation bandplan 998
and 997
• Support U0 band, customer PSD, RFI notch,
single latency in PTM mode and INP
• Support UPBO and DPBO, Reed Solomon and
trellis coding
• Support ADSL fall back with ADSL/ADSL2/
ADSL2+ CPE in Annex A, M, L modes
• Support IEEE 802.1ag Connectivity Fault
Management (CFM)
ELC1220G-55
• Support 20 open slots for Fast Ethernet SFP
(100Base-FX/BX/LX/EX)
• One mini-RJ-11 console
• Aggregates layer-2 traffic from Fast Ethernet
subscribers to the chassis system
• Support multicast VLAN, IGMP snooping, IGMP
filter and static multicast functions for MoD
services
• Support DHCP relay, option82 and snooping
functions
• Support ACL, anti-IP address spoofing and anti-
MAC address spoofing security functions
MSC1000G
• Failover-enabled network termination card
(IES-5000 only)
• Embedded 24G, non-blocking full duplex
switching fabric
• Two 1000M interface modules (SFP + copper)
for subtending
• Two 1000Base-SX/LX/EX/ZX (mini-GBIC, SFP)
interface for uplink
• One RS232 (DB-9) serial console port
• One 10/100M out-of-band Mgmt interface
• One external alarm IO port
VOP1248G-61
• 48-port VoIP line card
• Support H.248 version 2 or SIP singling
protocol
• Compatible CPE including POTS phone, Fax,
analog modem and pay phone
• Support G.711 a/µ, G.726, G.729 a/b G.723.1
• 20K Busy Hour Call Attempts (BHCA)
• Configurable jitter buffer
• Support the generation of dial tone, second
dial tone, ringing tone (ring-back tone), busy
tone, off-hook warning tone
• Support call waiting, call hold, call transfer,
return and call back on busy
• Emergency call local route
• Local dial available
• MLT (Metallic Loop Testing for subscriber lines)
and GR-909 loop diagnostic
• Ringer Max output power: 15 Watt
IES-5000
IES-5005
6.5U/3.5U MSAN/DSLAM
with DC Power
IES-5000
IES-5005
6.5U/3.5U MSAN/DSLAM
with DC Power
