ZyXEL Communications ETHERNET SWITCHES ES-1016 User Manual Download

Page: 21 / 24

Dimension ES-1016/ES-1024 Ethernet Switch

Product Specifications

Appendix A

Product Specifications

This section provides the specifications of the switch.

GENERAL

Standards

IEEE802.3 10BASE-T Ethernet (twisted-pair copper)
IEEE802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
ANSI/IEEE802.3 Auto-negotiation
IEEE802.3x Flow Control

Interface

ES-1024: 24 10/100BASE-T Ethernet ports
ES-1016: 16 10/100BASE-T Ethernet ports

Data Transfer Rate

Ethernet: 10Mbps(half duplex)
20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex)
200Mbps(full duplex)

Network Cables

10BASE-T: UTP Cat.3, 4, 5 (100 m) EIA/TIA-586 100-ohm STP (100 m)
100BASE-TX: UTP Cat.5 (100 m max.) EIA/TIA-568 100-ohm STP (100 m
max.)

Full/Half Duplex

Full/Half duplex for 10/100Mbps speeds

Media Interface
Exchange

All ports MDI/MDIX auto-sensing

PERFORMANCE AND MANAGEMENT

Back plane

Non-Blocking full wire speed forwarding rate 3.2Gbps

Packet Forwarding Rate

14880PPS for 10BASE-T
148800PPS for 100BASE-TX

Switching Method

Store-and-forward

MAC Address Table

8K entries per main switch

Data Buffer

ES-1024: 512 KB
ES-1016: 4MB

PHYSICAL AND ENVIRONMENTAL

Weight

2Kg

LED

Per port: LK/ACT, FD/COL
Per unit: Power

Dimensions

440(W) x 160(D) x 44(H) mm

Power Supply

100 - 240VAC 50/60Hz internal universal power supply

Power Consumption

Main switch: 17W max. ES-1016: 10W max. ES-1024: 16W max.

Operating Temperature

℃

~45

℃

(32ºF to 113ºF)

Summary of Contents for ETHERNET SWITCHES ES-1016

























Search results

Summary of Contents for ETHERNET SWITCHES ES-1016

Reviews:

Related manuals for ETHERNET SWITCHES ES-1016

Brands by name

Popular brands

ZyXEL Communications ETHERNET SWITCHES ES-1016, User Manual

Search results

Summary of Contents for ETHERNET SWITCHES ES-1016

Reviews:

Related manuals for ETHERNET SWITCHES ES-1016

Brands by name

Popular brands